편집위원회

Journal of the Korean Society of Propulsion Engineers - Vol. 22 , No. 5

[ Prev] [Go to Volume List] [ Next]

1. p. 1 A Study on the Through-Flow Analysis for a Multi-Stage Axial Turbine Considering Leakage Flows

Sangjo Kim, Kuisoon Kim, Changmin Son
DOI: https://doi.org/10.6108/KSPE.2018.22.5.001

2. p. 13 A Survey on the Software Technology of Health Management System for Aircraft Gas Turbine Engine

Iksoo Park, Taeseok Ki, Junghoe Kim, Seongki Min
DOI: https://doi.org/10.6108/KSPE.2018.22.5.013

3. p. 22 Dynamic Characteristics of Pintle Nozzle about Changes of Chamber Boundary Condition

Kiyeon Jeong, Dong-Gi Kang, Daeyeon Lee, Jaesung Choi
DOI: https://doi.org/10.6108/KSPE.2018.22.5.022

4. p. 32 Influence of Critical Point of Hydrocarbon Jet Injected into Near-Critical Environment on Injection Behavior

Taekyung Yoon, Dongsoo Shin, Keonwoong Lee, Jaye Koo
DOI: https://doi.org/10.6108/KSPE.2018.22.5.032

5. p. 40 Design Reliability Estimation of Low Energy Exploding Foil Initiator

Minwoo Lee, Seungjun Back, Youngkap Son, Seung-gyo Jang
DOI: https://doi.org/10.6108/KSPE.2018.22.5.040

6. p. 49 A Research on Control Method Design for the Intake Flow of a Dual Combustion Ramjet Engine using Multiple Control Inputs

Jungwoo Park, Iksoo Park, Junghoe Kim, Kiyoung Hwang
DOI: https://doi.org/10.6108/KSPE.2018.22.5.049

7. p. 59 HTPB Propellant Ageing Property and HFC Base Shelf-life Evaluation Method

Wonho Cho, M. Westerlund, Baekneung Ryoo, Gyoodong Jung, Jichang Yoo
DOI: https://doi.org/10.6108/KSPE.2018.22.5.059

8. p. 66 A Numerical Study on Performance Characteristics of STED with various Pressure Ratios and Cone Shapes using Burnt Gas Properties

Seongha Yu, Seonghwi Jo, Hongjip Kim, Youngsung Ko, Jaejeong Na
DOI: https://doi.org/10.6108/KSPE.2018.22.5.066

9. p. 73 Uncertainty Quantification of Propulsion System on Early Stage of Design

Joongki Ahn, Ki In Um, Ho-il Lee
DOI: https://doi.org/10.6108/KSPE.2018.22.5.073

10. p. 81 Study on the Deactivation Trends of Liquid Fuel According to the Types of Endothermic Catalyst in Flow Reactor

Tae Ho Lee, Sunbin Jeon, Sung Hyun Kim, Byung Hun Jeong, Jeong Sik Han
DOI: https://doi.org/10.6108/KSPE.2018.22.5.081

11. p. 88 Spray Characteristics of Jet According to Position of Injector Hole in Crossflow

Myeung Hwan Choi, Dong Soo Shin, Kanmaniraja Radhakrishnan, Min Son, Jaye Koo
DOI: https://doi.org/10.6108/KSPE.2018.22.5.088

12. p. 97 Scramjet Experimental Techniques Using a Shock Tunnel

Sungmo Yang, Keunyeong Kim, Eric Won Keun Chang, Sangwook Jin, Gisu Park
DOI: https://doi.org/10.6108/KSPE.2018.22.5.097

13. p. 107 Calculation and comparison of Liquid Oxygen Filling System between the KSLV-I Flight Test Data and the modeling of the KSLV-II Launch Complex

Mansu Seo, Jae Jun Lee, Ilgu Hong, Sunil Kang
DOI: https://doi.org/10.6108/KSPE.2018.22.5.107

14. p. 115 Performance Characteristics of 0.4 MW Class Arc-Heated Plasma Wind Tunnel

Philyong Oh, Rajesh Kumar Chinnaraj, Seong Min Hong, Eui Sup Shin, Seong Man Choi
DOI: https://doi.org/10.6108/KSPE.2018.22.5.115

15. p. 125 A Study on Anti-oxidization Coating for Staged Combustion Cycle Rocket Engines

Young-June Kim, Byong-ho Rhee, Yong-Oh Noh, Byung-Hyun Bae, Seong-Yoon Hyun, Hwang-Rae Cho, Jeong-Suk Bang, Eung-Sun Byon, Yeoung-Min Han
DOI: https://doi.org/10.6108/KSPE.2018.22.5.125

16. p. 132 Analysis on Flow Control Method for Simultaneous Fuel Filling of the Korea Space Launch Vehicle-Ⅱ

Inseok Yeo, Jaejun Lee, Jaechel An, Sunil Kang
DOI: https://doi.org/10.6108/KSPE.2018.22.5.132

17. p. 141 Analysis of Orbit Injection Performance of KSLV-II by Weight Reduction

Hye-Sung Kim, Seong-Min Yang, Jeong-Yeol Choi
DOI: https://doi.org/10.6108/KSPE.2018.22.5.141

논문집 소개
논문투고안내
- 논문투고안내
  Instructions to Authors
- 논문집필요강
  Guidelines for Manuscript Writing
논문투고 및 심사
논문자료실